|
|
|
|
|
Yang, Bo (2003) 3D BE Code of Anisotropic Elasticity.
|
|
|
|
Yang, Bo (2003) 3D GF for Anisotropic Elastic Bimaterials.
|
|
|
|
Powell, Adam C., IV (2003). A heat transfer calculation. .
|
|
|
|
Beers, Kathryn, Cabral, J. T., Walls, H. J., Karim, Alamgir and Amis, Eric (2003). A High-Throughput Milli-Fluidic Platform For Polymer Formulations. Polymer Preprints 44 (2). .
|
|
|
|
Kattner, Ursula (2003). Ag-Bi System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Bi-Cu System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Bi-Pb System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Bi-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Cu System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Cu-Pb System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Cu-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Pb System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Pb-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Ag-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Bi-Cu System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Bi-Cu-Pb System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Bi-Cu-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Bi-Pb System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Bi-Pb-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Bi-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Powell, Adam C., IV (2003). CD Injection Molding II: Shear Stress. .
|
|
|
|
Powell, Adam C., IV (2003). Chemical vapor deposition. .
|
|
|
|
Powell, Adam C., IV (2003). Chemical vapor deposition reactor design. .
|
|
|
|
Powell, Adam C., IV (2003). Coextrusion of multilayer polymer sheets. .
|
|
|
|
Forster, Aaron M., Stafford, Christopher, Karim, Alamgir and Amis, Eric (2003). Combinatorial adhesion measurements: Factorial design concepts for data collection and library evaluation. Polymeric Materials: Science & Engineering 2003 88 (). .
|
|
|
|
Crosby, Alfred and Karim, Alamgir (2003). Combinatorial Investigations of Interfacial Failure. Journal of Polymer Science: Part B: Polymer Physics 41 (9). .
|
|
|
|
Smith, Archie, Sehgal, Amit, Douglas, Jack and Karim, Alamgir (2003). Combinatorial Mapping of Surface Energy Effects on Diblock Copolymer Thin Film Ordering. Macromolecular Rapid Communications 24 (1). .
|
|
|
|
Beers, Kathryn, Douglas, Jack, Amis, Eric and Karim, Alamgir (2003). Combinatorial Measurements of Crystallization Growth Rate and Morphology in Thin Films of Isotactic Polystyrene. Langmuir 19 (9). .
|
|
|
|
Kattner, Ursula (2003). Cu-Pb System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Cu-Pb-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Kattner, Ursula (2003). Cu-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Powell, Adam C., IV (2003). Decomposition of poly(vinyl chloride). .
|
|
|
|
Powell, Adam C., IV (2003). Dimensional analysis: diffusion of a zinc coating. .
|
|
|
|
Powell, Adam C., IV (2003). Drag force on a flat plate. .
|
|
|
|
Powell, Adam C., IV (2003). Estimating fluid velocity using heat transfer. .
|
|
|
|
Powell, Adam C., IV (2003). Floating bubbles out of molten glass. .
|
|
|
|
Powell, Adam C., IV (2003). Fluid flow in blood vessels. .
|
|
|
|
Powell, Adam C., IV (2003). Freezing by radiation and convection. .
|
|
|
|
Obrzut, J. and Anopchenko, O. (2003). High Frequency Input Impedance Characterization of Dielectric Films for Power-Ground Planes. IEEE Transactions on Instrumentation and Measurement 52 (4). .
|
|
|
|
Pan, Ernian and Djurkovic, Sandra (2003). Introduction to Green's Functions. .
|
|
|
|
Powell, Adam C., IV (2003). Iron oxidation. .
|
|
|
|
Powell, Adam C., IV (2003). Ladle metallurgy I: scaleup of a lab design. .
|
|
|
|
Powell, Adam C., IV (2003). Ladle metallurgy II: natural convection. .
|
|
|
|
Powell, Adam C., IV (2003). Laminar and turbulent boundary layers. .
|
|
|
|
Goldie, Scott, Fasolka, Michael, Goldner, Lori, Hwang, Jeeseong and Beers, Kathryn (2003). Near-Field Polarimetric Characterization of Semi-Crystalline Polymer Systems. Polymeric Materials: Science & Engineering 88 (). .
|
|
|
|
Powell, Adam C., IV (2003). Nitriding of an iron thin film. .
|
|
|
|
Powell, Adam C., IV (2003). Non-Newtonian polymer flow in a channel. .
|
|
|
|
Kattner, Ursula (2003). Pb-Sn System. Metallurgy Division of the Materials Science and Engineering Laboratory (MSEL) at the National Institute of Standards and Technology (NIST).
|
|
|
|
Powell, Adam C., IV (2003). Polymer extrusion and thermal stress. .
|
|
|
|
Davis, Cher, Beers, Kathryn, Forster, Aaron M., Stafford, Christopher, Smith, Archie, Harrison, Christopher, Zhang, Wenhua, Karim, Alamgir and Amis, Eric (2003). Polymer Science at the NIST Combinatorial Methods Center. Polymeric Materials: Science & Engineering 88 (). .
|
|
|