|
|
|
|
|
Handford, Christina G. (2005). Atomic Scale Theory of Real-Time X-ray Signatures in Pulsed Laser Deposition. Cornell Center for Materials Research.
|
|
|
|
Powell, Alanna (2005). Biological Ligands and Metal Transport. Cornell Center for Materials Research.
|
|
|
 |
Chen, Ting (2005). Biomolecule-Directed Assembly of Nanoscale Building Blocks Studied via Lattice Monte Carlo Simulation. Glotzer group. Depts of Chemical Engineering, Materials Science and Engineering, Macromolecular Science, and Physics,University of Michigan.
|
|
|
|
Rosales, Rosa Patricia (2005). Building Blocks in Motion: Development of an Exhibit on Brownian Motion with the Sciencenter. Cornell Center for Materials Research.
|
|
|
|
Spinelli, Joseph (2005). Bulk GaN Growth by Gallium Vapor Transport. Cornell Center for Materials Research.
|
|
|
|
Gould, Troy (2005). Cellulose Solution Rheology. Cornell Center for Materials Research.
|
|
|
|
Hughes, Nicholas (2005). Chaotic Mixing in Microfluidic Devices. National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
|
Tsai, Tracy (2005). Characterization of Microsphere Lasers. Cornell Center for Materials Research.
|
|
|
|
Cruz Quiñones, Miguel (2005). Characterization of ordered intermetallics as catalysts for fuel cell applications. Cornell Center for Materials Research.
|
|
|
|
Griffin, Rory (2005). Characterization of Silicon and Biomaterials of Vascular Plants. Cornell Center for Materials Research.
|
|
|
|
Tyler, Timothy P. (2005). Charge Density Waves in Quasi 1D and 2D Conductors. Cornell Center for Materials Research.
|
|
|
|
Ashby, Mike (2005). Chart - Fracture Toughness Modulus. Granta Design.
|
|
|
|
Ashby, Mike (2005). Chart - Modulus Density. Granta Design.
|
|
|
|
Ashby, Mike (2005). Chart - Strength Density. Granta Design.
|
|
|
|
Ashby, Mike (2005). Chart - Thermal Expansion Thermal Conductivity. Granta Design.
|
|
|
|
Powell, Adam C., IV (2005). Chemical Vapor Infiltration for Carbon-Carbon Composites. .
|
|
|
|
Harris, Theodore (2005). Combinatorial Study of Nickel-Gold p-contacts for Blue InGaN Light Emitting Diodes Comparing Electron Beam and Pulsed Laser Deposition Techniques. National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
|
Thompson, Linda (2005). Component Spread Investigation of Multicomponent Amorphous Silicate Planar Optical Amplifiers. Cornell Center for Materials Research.
|
|
|
|
Chen, Carey (2005). Computational Modeling of Arsenic in Electronic Materials (SiGe alloys). Cornell Center for Materials Research.
|
|
|
 |
Cebe, Peggy, Cherdack, Danial, Ince, B. Seyhan, Buckley, Jennifer, Jenkins, Mathew, Pan, Jingjing, Washington, Niesha, Alpern, Robert, Amare, Debeshu, Dolan, Breanna, Jones, Stacey and Kobylarz, Ryan (2005). Control Of Crystal Phases in PVDF/OMS Nanocomposites. In: , , :.
|
|
|
|
Rhodes, Steven D. (2005). Controlled Drug Delivery From New Biomaterials. Cornell Center for Materials Research.
|
|
|
|
Pelet, Jeisa (2005). Controlled Drug Delivery from New Biomaterials. Cornell Center for Materials Research.
|
|
|
|
Fisher, Nathan (2005). Correlating HMDS (hexamethyldisilazane) Modified Silica Substrate Surface Characteristics to Thin Film Morphology of Poly(3-hexylthiophene). National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
|
Jones, Melanie (2005). Coverage of Strontium Titanate on Silicon Substrate. Cornell Center for Materials Research.
|
|
|
|
Friesen, Michael (2005). Creating Elemental Arrays in the Python Numeric Module and Band Gaps of High Temperature Superconductor Crystals. Cornell Center for Materials Research.
|
|
|
|
Powell, Adam C., IV (2005). Crystal-free zone in a glass-ceramic dish. .
|
|
|
|
Kozen, Alexander (2005). Determination of the Structure of Engineering Materials. Cornell Center for Materials Research.
|
|
|
|
Zeitoun, Ramsey (2005). Development of a Bismuth Filter for the Filter Analyzer Neutron Spectrometer. National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
|
Hwang, Jesse (2005). Development of Calcium Phosphate-gelatin Composites. National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
 |
Chan, Elaine (2005). Diblock Copolymer Mono-Tethered POSS Cylinders. Glotzer group. Depts of Chemical Engineering, Materials Science and Engineering, Macromolecular Science, and Physics,University of Michigan.
|
|
|
|
Mesick, Nathan (2005). Diffusion in Nickel-Base Superalloys and Bond Coats. National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
|
Powell, Adam C., IV (2005). Diffusion of water vapor into a flowing adhesive sheet. .
|
|
|
|
Powell, Adam C., IV (2005). Dimensional analysis: mixed radiation and conduction. .
|
|
|
|
Lin, Joyce (2005). Drug Delivery Using Nanoparticles. Cornell Center for Materials Research.
|
|
|
|
Woo, Claire (2005). Dynamic response of a PEM fuel cell under reactant gas starvation. Princeton Center for Complex Materials (PCCM).
|
|
|
|
Haslam, Bryan (2005). Effective Gain Measurement in Quantum Cascade Lasers: A new method to measure gain in Quantum Cascade Lasers. Princeton Center for Complex Materials (PCCM).
|
|
|
|
Lin, Tina (2005). Electron States in Metal Nanoparticles. Cornell Center for Materials Research.
|
|
|
|
Walker, Noël (2005). Engineering DNA as a Generic Material. Cornell Center for Materials Research.
|
|
|
|
Blazek, Katerina (2005). Environment friendly ‘green’ composites. Cornell Center for Materials Research.
|
|
|
|
Bykowski, Mikolaj (2005). Evaluating the Fire Resistance of Structural Steels. National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
|
Powell, Adam C., IV (2005). Extrusion of a tube. .
|
|
|
|
Powell, Adam C., IV (2005). Flow through a catalytic reactor. .
|
|
|
|
Powell, Adam C., IV (2005). Freezing lake. .
|
|
|
|
Liu, Alison (2005). Gallium Nitride Nanowire Growth and FET Devices Fabrication. Cornell Center for Materials Research.
|
|
|
|
Lee, Constance (2005). Grain Growth and Boundary Migration in Strontium Titanate. National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
|
Shu, Jessica (2005). Hole Injection in Molecularly Doped Polymers. Cornell Center for Materials Research.
|
|
|
 |
Joydeep, Mukherjee (2005). Honeycomb network. Glotzer group. Depts of Chemical Engineering, Materials Science & Engineering, Macromolecular Science, and Physics,University of Michigan.
|
|
|
 |
Zhang, Zhenli (2005). Icosahedrons by Patchy Particles. Glotzer group. Depts of Chemical Engineering, Materials Science & Engineering, Macromolecular Science, and Physics,University of Michigan.
|
|
|
|
Fierke, Melissa (2005). Interfacing Polymer and Solid State Materials on the Nanoscale. Cornell Center for Materials Research.
|
|
|
|
Griggs, Cornelius (2005). Investigating Mechanical Properties of Thin Films via Nanoindentation. National Institute of Standards and Technology, Technology Administration, U.S. Department of Commerce..
|
|
|
Guest - May 18, 2013